Grizzly G0945 6-Inch Benchtop JointerWeekend Warrior
Specifications
| Motor | 1.5 HP |
| Voltage | 120V |
| Table | 30 x 6-1/4 inches, cast aluminum |
| Weight | 44 lbs |
| Dust Port | 2.5" |
| Type | Benchtop |
| Cutting Width | 6" |
| Cutterhead | Straight Knife |
| Knives / Inserts | 2 knives |
| Cutterhead Speed | 11000 RPM |
| Bed Length | 30" |
| Max Depth of Cut | 1/8" |
| Fence | 19-3/4 x 4-5/16 inches |
| Fence Tilt | 90 to 45 |
Who It's For
A first jointer for someone who wants to square up small stock without giving a floor machine any space. It bolts to a bench, weighs 44 pounds, and does fine on short boards. If you already know you'll be flattening long hardwood, you'll outgrow it quickly.
What Owners Praise
- Cheap enough to find out whether you actually need a jointer
- Light enough to lift onto a bench and stow away when you're done
- Cuts clean edges on short stock once the fence is squared
- Two knives are easy to swap and cost about twenty dollars a set
What Owners Report as Limitations
- The extruded aluminum fence is light and flexes, and it's the complaint that comes up most
- At 44 pounds it walks across the bench unless you clamp or bolt it down
- A 30-inch bed is too short for long boards, so you'll need infeed and outfeed support
Upgrades & Compatibility
There isn't a real upgrade path here. Replacement knives are Grizzly T32900, about twenty dollars a pair. The honest upgrade is a bigger machine, and your money goes further moving up than modifying this one.
Alternatives to Consider
-
The G0946 is the same 6-inch benchtop with a spiral-type cutterhead instead of straight knives, so you get quieter cuts and cleaner results in figured grain for a small step up in price.
Compare with Grizzly G0946 -
The WEN JT3062 is a comparable 6-inch two-blade benchtop at a lower entry price, similar capacity with fewer refinements, a budget-first alternative.
Compare with Wen Jt3062 -
The Cutech 40160HB is a lighter 6-inch benchtop that ships with a spiral cutterhead as standard, trading Grizzly's slightly heavier build for better out-of-box cut quality.
Compare with Cutech 40160hb
Specs sourced from manufacturer documentation. Owner feedback reflects community reports from r/woodworking, Sawmill Creek, and Amazon verified reviews. Prices may vary by retailer and change over time.